STAB CHLOR GRAN
AND ALGAE in Swimming Pool Water
1. For outdoor
pools, chlorine residuals can be protected from destruction by the sun’s rays by
adding 300 g of STAB/COND per 10,000 L of pool water to yield the required initial
concentration of 30 ppm.
2. Maintain proper chlorine residual by adding
daily over the pool’s surface, 40 g of STAB CHLOR GRAN per 10,000 L of pool
water, or as needed.
1. NOTE: Hot weather, heavy pool usage and rain
may require higher usage rates to maintain proper chlorine residuals.
Periodic superchlorination of pool water is recommended. Follow label instructions
3. STAB CHLOR GRAN contains cyanuric acid stabilizer which
can accumulate in pool water. Keep stabilizer within the recommended range of
30-100 ppm by dilution with fresh water.
4. While STAB CHLOR GRAN
can be used for superchlorination by using 180 g per 10,000 L of pool water, care
must be taken to avoid excessive accumulation of stabilizer.
Maintain proper daily levels as determined by testing kit.